• FiniteBanjo@feddit.online
    link
    fedilink
    English
    arrow-up
    0
    ·
    24 days ago

    NGL you couldn’t pay me to use the newer models after the 30 series. First of all, I don’t touch anything developed with or alongside AI. Secondly I have heard the new power cables are fire hazards only rated for a dozen plugs and unplugs.

    • KingRandomGuy@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      23 days ago

      FWIW, lots of power connectors are indeed only rated for a low number of mating cycles (only 30), not just 12VHPWR. This includes the old PCIe 8 pin (same 30 limit). Realistically you will probably not reach the rated limit.

      The actual problem, I think, is that the connector could operate without being fully plugged in, especially without current balancing on the side of the card. This is an actual fire hazard, as you now get at least some connections with very high resistance, forcing extreme current on the remaining wires with low resistance connections. This is combined with the fact that the safety margin on 12VHPWR is a lot lower than that of the PCIe 8 pin (which I believe can safely carry a lot more than its 150W rating).

      • FiniteBanjo@feddit.online
        link
        fedilink
        English
        arrow-up
        0
        ·
        23 days ago

        I see you start off with a bit of devils advocacy before acknowledging the risks, but this is what happens with the 12VHPWR cables:

        image

        This is not normal. This is new.